Product ID:POLYAMIDE RESIN,388-390
MSDS Date:01/01/1989
FSC:8030
NIIN:00N010900
MSDS Number: BJJRT

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: SCIEN

Telephone: 716-265-0413

Cage: SCIEN

POLYAMIDE RESINS

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50 RAT ORAL 15 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXTREME INHALATION OF VAPORS CAN CAUSE
DEATH BY PARALYSIS OF THE RESPIRATORY CENTER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATING.MOLTEN RESIN CAN CAUSE SEVERE
BURNS.SKIN:MOLTEN RESIN CAN CAUSE SEVERE BURNS.INGESTION:MOLTEN
RESIN CAN CAUSE SEVERE BURNS.INHALATION:RESPIRATORY
IRRITANT.HEADACHE,TIREDNESS AND NAUSEA .EXTREME INHALATION CAN
CAUSE DEATH.
Medical Cond Aggravated by Exposure:N/K

First Aid:ALL CASES:IF IRRIT DEVELOPS,SEEK MED HELP.EYES:FLUSH W/ H*2O
FOR AT LEAST 15 MIN.CONT W/ MOLTEN RESIN:IMMED COOL W/ COLD H*20.DO
NOT REMOVE RESIN.GET MED HELP FOR REMOVAL.SKIN:WASH W/ SOAP & H*2O
FOR 15 MIN.REMOVE CONTAM CLTHG.CONT W/ MOLTEN RESIN:IMMED COOL W/
COLD H*2O.DO NOT REMOVE RESIN.GET MED HELP FOR REMOVAL.INGEST:CALL
MD IMMED .INHAL:MOVE FROM EXPOS.BRTHG STOPS:GIVE MOUTH-TO-MOUTH.

Flash Point:N/A (NON-VOLAT)
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:WATER,CO*2,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:N/K

Spill Release Procedures:PICK UP SPILLED MATERIAL AND
CONTAINERIZE.VACUUM AREA OR FLUSH WITH WATER TO REMOVE RESIDUE.
Neutralizing Agent:N/K

Handling and Storage Precautions:GOOD HYGIENE PRACTICES SHOULD BE
STRICTLY FOLLOWED.FOR LABORATORY USE ONLY.NOT TO BE SOLD/NOT
INTENDED FOR DRUG,HOUSEHOLD,OTHER USES.
Other Precautions:STATIC DISCHARGE POSS.IN PRESENCE OF FLAM OR COMBUST
LIQ,MINIMIZE CHANCE OF IGNIT BY GROUNDING,INERTING,ETC.MOLTEN RESIN
MAY CAUSE SEV BURNS.IF SKIN/EYE CONTACT OCCURS,IMMED COOL W/ COLD
H*2O.DO NOT R EMOVE RESIN.GET MED HELP FOR REMOVAL.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEBATH AND/OR SAFETY SHOWER.
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE STRICTLY
FOLLOWED.
Supplemental Safety and Health
MP:127-137F,53-58C.ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .

Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:SEE SUPP
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:0.90 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID,DICED,LIGHT AMBER PARTICLES WITH SLIGHT
RESINOUS ODOR.

Stability Indicator/Materials to Avoid:YES
N/K
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:N/K
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.